The author of the Igor's Lab website tested all methods of applying thermal paste to the GPU to finally answer the question - which one?
The reviewer also warned that the large gapbetween the GPU and the cooler results in inadequate cooling, which is why he strongly recommends the use of "high viscosity thermal paste".
Before applying new paste to the GPU, you should alsowarm the tube in your palms and make sure that the crystal on the GPU is not cold to the touch. You can also use a hairdryer. The reviewer tested the following application methods: standard, described on the paste package; just a drop in the center; vertical line or "sausage" in the middle.
The last method was the winner.But for the best effect, it must be combined with a certain style of cooler installation. The author suggests placing the cooling system directly on the GPU without any slips or big movements by applying a small amount of force to one side of the case using the side twin screws. Then you need to insert the screws on the other side and alternately and carefully tighten one or the other until the cooler fits tightly. The application of this method guarantees a difference of five degrees compared to other methods.